Send inquiry
315 Series vertical and horizontal rotary table is one of the main accessory of milling machine, it is used for index boring, milling, circle cutting, spot facing and boring hole etc. On milling machine. Rotary table in vertical with tailstock working together, it can used on complex work for circle index boring and milling.
As clients' special requirements the TSL with left handwheel can be offered.
As clients' special requirements the TSL with left handwheel can be offered.
Items | 31500 | 31501 | 31502 | 31503 | 31504 | 31505 |
Table diameter mm | Φ150 | Φ200 | Φ250 | Φ300 | Φ350 | Φ400 |
Morse taper of the center hole | 3# | 3# | 3# | 4# | 4# | 4# |
Height of center for Verti.mounting mm | 100 | 135 | 165 | 195 | 230 | 260 |
Width of the T-slot mm | 12 | 12 | 12 | 14 | 14 | 14 |
Adjacent angle of table T-slot | 90° | 90° | 60° | 60° | 60° | 60° |
Width of the locating key mm | 16 | 16 | 16 | 16 | 16 | 18 |
MOdule of the worm gear | 1.5 | 1.5 | 2 | 2.5 | 2.5 | 3.5 |
Transmission ratio of the worm gear | 1:90 | 1:90 | 1:90 | 1:90 | 1:90 | 1:90 |
Graduation of the table | 360° | 360° | 360° | 360° | 360° | 360° |
Rotating angle of table with one revolution of the worm | 4°(1´ per raduation) | 4°(1´ per raduation) | 4°(1´ per raduation) | 4°(1´ per raduation) | 4°(1´ per raduation) | 4°(1´ per raduation) |
MInimum value of vernier | 10´´ | 10´´ | 10´´ | 10´´ | 10´´ | 10´´ |
Indexing accuracy | 80´´ | 80´´ | 60´´ | 60´´ | 60´´ | 60 ´´ |
Max.bearing (with table Hor.)kg | 100 | 150 | 200 | 250 | 300 | 350 |
Max.bearing (with table Vert.)kg | 50 | 75 | 100 | 125 | 150 | 175 |