Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set
Fiberglass Walkway Grating is a structure panel which uses high-strength ECR-glass roving as reinforced material, thermosetting resin as matrix and then casted and formed in a special metal mold.
The rounded end is designed for round stainless steel handrails with a diameter of 42.4 millimeters and a thickness of 2 millimeters. You can also use it with a solid wooden handrail 42 millimeters in diameter, using a stainless steel fitting for wood.
The graphite electrode will be a high-temperature graphite conductive material, the core of which consists of petroleum coke, tar coke as a filler, coal tar as a binder.
The graphite block adopt vibration-molded, carbonized and graphitized under precise technical control. Usually machined to specific shapes for various purposes.
By adding Mo element to 316 stainless steel, the corrosion resistance and strength in high temperature has greatly improved. It can resist high temperature from 1200℃ to 1300℃ and it is also can be used under very tough conditions. Application area: Chemi
Molded plastic grating is manufactured by laying continuous glass fibres in the mould in the direction of vertical and horizontal, and thurougly wetted out with resin, layer by layer. When the weaving process is completed, the mould is heated to cure the
RBSiC Cross Beam introduction This is reaction-bonded (silicon infiltrated) silicon carbide, being formed zero porosity by filling up open porosity with silicon metal (Si). Because of it's zero porosity characteristic, thermal conductivity is more tha
Construction:6X7+FC,7x7,6X12+7FC,6X15+7FC,6X19+IWRC,6x19+IWS,6X19S+SISAL,7x19,etcSurface:ungalvanizedService:Your inquiry will be replied within12 hours
Aluminium coil, with its high corrosion resistance, high plasticity and high thermal conductivity, according to its different density and strength, now is widely used for further processing or prepainting
Cold rolled steel coil is made from high-quality hot rolled steel coil, through pickling and edge cutting to remove the oxide skin. It is mainly used in automobile manufacturing, electrical products, metal stamping, home appliance manufacturing, construct
High alumina brick is a neutral refractory with alumina content above 48%. It is formed by calcining alumina and other raw materials with high alumina content. High thermal stability, fire resistance above 1770℃. It has good slag resistance and is used fo
Galvanized steel coil is a product applying the zinc layer over the steel's surface in order to protect them from rusting and its generally done by hot dip galvanization in which parts are submerged in the bath of molten zinc.
Green silicon carbide is made of petroleum coke and high-quality quartz sand as the main raw material and salt as additive. It is gotten by high temperature smelting of resistance furnace. Green SiC is of high purity and hardness, and its hardness is betw
1. Grade: X42, X46, X52, X56, X60, X70, X802. Type: Seamless, ERW, LSAW, SSAW3. Production capacity: 150,000 tons per year4. Market: most of Europe,America,the Middle East and Australian market.
Aluminum extrusion casting, also known as "liquid die forging", is a method of pouring molten or semi-solid metal into a metal mold and then applying it to the original to solidify under pressure to obtain a blank or part.