Nicrosil-Nisil thermocouple is the latest base metal thermocouple, developed to improve the drawbacks that type K thermocouple has. The main chemical composition of positive leg Nicrosil(NP) is Ni: Cr: Si≈84.4: 14.2: 1.4; negative leg Nisil (NN) is Ni:
Quick assembly, customizable specifications, sturdy and aesthetically pleasing, providing you with a comfortable living experience.The overall frame profile is one-time formed using high-frequency welding equipment, and all splices are designed with upper
Thanks to the perfect combination of special corundum and special resins, the WINONE super-thin cutting wheel series have a very high metal removal rate, quickly discharges the heat generated by the cut and reduces resin carbonization resulting in a longe
Stainless steel corrugated hose will expends at the axis direction by the force of inner fluids pressure without the protection of the braid. Normally ,the braid is weaved by the stainless steel wires or stainless steel straps.
The Green SiC which we supplied are effective in wire sawing for silicon wafers in photovoltaic industry. As the grits has a specific grain shape and classified carefully by our unique processing technology, the particle size distribution meets the requir
SiSiC Cross Beam introduction This is reaction-bonded (silicon infiltrated) silicon carbide, being formed zero porosity by filling up open porosity with silicon metal (Si). Because of it's zero porosity characteristic, thermal conductivity is more tha
Zn98Al2 Copper aluminum flux cored wire The Zn98Al2 copper aluminum flux cored rod consists of a zinc-aluminum alloy in strip form with non-corrosive and non-hygroscopic brazing flux inside. Zn98Al2 copper aluminum flux cored welding wire is used to braze
Fused cast AZS 33 brick is the fused AZS brick with content of ZrO2 about 33%. Fused cast AZS 33 brick has good corrosion resistance and pollution preventing ability, suitable for the higher temperature area and area of glass flow being faster.
Die casting is a metal casting process characterized by the use of a mold cavity to apply high pressure to the molten metal. Molds are usually machined from higher strength alloys, some of which are similar to injection molding.
When the relative movement of the working surface occurs,a continous lubricating film will be rapidly generated to protect the contacting surfaces from wearing and friction. Depending on the working conditions, Carbon steel back, Stainless steel back and