Products Description

U-TYPE silicon carbide sic heating element is widely used for controlled atmosphere resistance.

Properties

*Heating surface of rated temperature: 1500°C.

Specifications

OD: 14mm-40mm Overall Length: 700mm-2300mm

Attentions

1. The best operating temperature range of silicon carbide rods is: the furnace temperature is below 1200℃, a voltage regulator must be equipped, and the current will gradually rise slowly (because each company has different temperature control equipment, specific issues can be negotiated) to prevent current Excessive impact on the rod body will cause the silicon carbide rod to burst and be damaged.

2. After the silicon carbide rod has been used for a period of time, due to the formation of a silicon dioxide protective film on the surface of the heating layer, the resistance value increases. It is recommended to gradually increase the F value or replace it as a spare rod.

About Service Life

The service life of the silicon carbide rod refers to the period from when the silicon carbide rod is installed and used on the equipment until it fails to work normally. However, according to the rules of the silicon carbide rod, its service life refers to the time required for the resistance value of the silicon carbide rod to age (increase) to 4 times the initial value during use. Here we see that the life of silicon carbide rods does not have a clear time limit, but a relative value. However, to ensure that the silicon carbide rods have a certain service life, first of all, the quality of the silicon carbide rods must be guaranteed, and secondly, the use must be scientific. , If the quality is the same and used scientifically, the service life of the silicon carbide rod will naturally be significantly prolonged

Q&A

1. How about the delivery period?

As per your request. Generally 10days.

2. What is the delivery sea port?

SHANGHAI, QINGDAO, TIANJIN or as per your request.

http://www.rena-ceramtec.com/